Cometech Testing Machines Co., Ltd.

Universal Testing Machine Tensile (Compression) Testing Machine (QC-506B1)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

QC-506A1 Tensile (Compression) Testing Machinehas already been upgraded to new model no.QC-506B1. Please check QC-506B1 for detail specifaction.

A tensile tester for industries of high-molecular, food, packing, electron and textile.

This competer servo tensile(compression) testing machine is the most popular type. the testing machine can be used for tensile test, compress test,bend test...etc. Attachments such as extensometer, extra load cell, oven or environment chamber are very powerful for special test.

This instrument is coating with “Static Electricity”, able to keep good and shinning appearance; The material testing machine is suitable for trading company, ordinary company, factory, and all industries.

For physical experiment of all material and finished products, semi-products and specimen; by change fixtures the tester can do all kinds of material test, such as tensile test, elongation, anti-compress, tearing, peeling, adhesive, stress, strain, shearing, etc.

The testing machine can connect together with Powerful software function, user can make the following action according to test result: 1. Statistics charts 2. Data table 3. Print out 4. Compare various data.The precision test equipment evaluates material test and provide reliable data.Simply to operate,this compression tester meet your any test requirements.(2011/Jun/27 10:24:14)

Universal Testing Machine Tensile ( Compression) Testing Machine (QC-508B1)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

QC-508A1 Tensile(Compression)Testing Machine has already been upgraded to new model no.QC-508B1. Please check QC-508B1 for detail specifaction.

A tensile tester for adhesion,spring,lamination membrane,wire,electrical component. Analyze peeling force,spring length force,tension,extension and pushing force.

Small dimension of this tester doesn't need too much space. Light capacity is very suitable for peeling test in tape(film), tesile test in yarn, and small material or finished products, etc...

This computer sever tensile(compression) testing machine is coating with “Static Electricity”, able to keep good and shinning appearance; this instrument is suitable for trading company, ordinary company, factory, and all industries.

For physical experiment of all material and finished products, semi-products and specimen; by change fixtures the test equipment can do all kinds of material test, such as tensile test, elongation, anti-compress, tearing, peeling, adhesive, stress, strain, shearing, etc.

Together with Powerful software function, user can make the following action according to test result: 1. Statistics charts 2. Data table 3. Print out 4. Compare various data.This testing machine can completely meet your requirement.(2011/Jun/27 10:24:14)

Universal Testing Machine Universal Material Testing Machine (QC-503B1)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

UNIVERSAL Testing machine are available to measure many physical properties including compression, tensile strength,adhesion, abrasion, friction, impact, internal bond, softness and thickness. Tensile testing machine is a floor type testing machine applied by latest design and producing skill to have strong structure, saving transmission power and electric current without specific power system. Universal tester can mount accessories such as controller, extensometer and grips to handle the analysis of material stress, strain, strength of bending endurance, elongation, tensile strength and elastic modulus. Undoubtedly universal material testing equipment still keep the advantage for testing precision, simply operation, expand strong. It’s the best choice for material testing equipment.Click view more pictures for more other related testing machines.

E-Catalogue
(2011/Jun/27 10:24:14)

Universal Testing Machine Hardness Tester (QC-206RT)(2011/Jul/26 16:54:45)

Tue, 26 Jul 2011 16:54:45 +0800

In accordance to the standards
EN-ISO 6506-2/ 6507-2/ 6508-2/ ASTM-E18

ABSOLUTE TEST LOAD
The hardness tester 206 RT is a motorized model with load cell aligned with the indenter to achieve Rockwell hardness tests HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK and generate Vickers HV10 - HV60 - HV100 indentions.
Versatile hardness tester for use in the workshop and laboratory, designed to control any type of material.

Pressing the wheel at the base you perform the contact with the surface to be examined; moving the upper lever, automatically, applies the load preset.
Motorized load selected is performed
The result appears immediately on the display.
Does not need to be level and can also work closely with vibration(2011/Jul/26 16:54:45)

Universal Testing Machine Material Testing Machine (QC-506B1)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Material testing machine are available to measure many physical properties including compression, tensile strength,adhesion, abrasion, friction, impact, internal bond, softness and thickness. The tensile tester has the strong structure and big operation space. The material test equipment can mount with different function of the controller for different industries according to user’s request. Testing systems can install other accessories like sensor, extensometer, grips and software depending on the various different specimens. Undoubtedly this testing instrument still keeps the advantage for testing precision, simply operation and convenient to upgrade. We have a series of B1 type QC-503B1/505B1/508B1/513B1 tensile/compression testing tester. Cometech manufactures material tensile testing machine for tension,compression,hardness and bending test in Taiwan. Users can choose the suitable compression testing tester base on their special testing requirements. Click view more pictures for more other related testing machines.(2011/Jun/27 10:24:14)

Universal Testing Machine Material Testing Machine (QC-508B1)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Material Testing Machine for adhesion,spring,lamination membrane,wire,electrical component. Analyze peeling force,spring length force,tension,extension and pushing force.

It’s new type meaterial testing machine which applied by latest design and producing skill to have strong structure and lightweight. Undoubtedly we still keep the advantage for testing precision, simply operation, expand strong. It’s the best choice for material testing machine.

We have a series B1 type: 503B1/505B1/508B1. The specification and function of them are the same expect external different.(2011/Jun/27 10:24:14)

Universal Testing Machine Material Testing Machine (QC-508E)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Description
Cometech QC-508E is a light model with small volume which does not take
space. It provides with stable test speed. The strong function computer
system and also provide complete test function. It is available to carry out a variety of material test with mount with different grips and accessory.(2011/Jun/27 10:24:14)

Universal Testing Machine Peel Force Tester (QC-507E)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Peel Force Tester for packing tap and adhesive test.

Peel Force Tester is designed by 180° peel force testing and control by computer chip.

This machine could make tensile/pressure testing also analyze various testing data by connecting with computer.(2011/Jun/27 10:24:14)

Universal Testing Machine Electricity Forming Machine (QC-602)(2011/Mar/16 15:59:35)

Wed, 16 Mar 2011 15:59:35 +0800

Both upper and lower platen have heating device and use oil hydraulic to compress. Pressure can be set 20%~90% of the full capacity.
Place plastic or rubber material into the casting mold, grip it between upper and lower heating plate, apply pressure and certain temperature to form the material into a standard shape to be a sample to serve for test, or to be an example of color comparison, also to be example before mass-production.(2011/Mar/16 15:59:35)

Universal Testing Machine Tensile (Compression) Testing Machine (QC-505B)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A tensile testor for high force industry, like Spring, Wire, Robber, Plastic.

Tensile (Compression) Testing Machine Floor Type can meet completely your requirement.Easy to operate, and easy to quality manage. With a professional software to a personal computer obtains complete testing result.

This Tensile (Compression) Testing Machine Floor Type is coating with “Static Electricity”, able to keep good and shinning appearance; this tester is suitable for trading company, ordinary company, factory, and all industries.

For physical experiment of all material and finished products, semi-products and specimen; by change fixtures this testing machine can do all kinds of material test, such as tensile test, elongation, anti-compress, tearing, peeling, adhesive, stress, strain, shearing, etc.

Together with Powerful software function, user can make the following action according to test result: 1. Statistics charts 2. Data table 3. Print out 4. Compare various data.(2011/Jun/27 10:24:14)

Universal Testing Machine Tensile ( Compression) Testing Machine (QC-506B)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Tensile( Compression)Testing Machine for industries of high-molecular, food, packing, electron and textile.

Tensile ( Compression) Testing Machine Bench Type, TABLE TYPE. Driven by DC serve motor. Closed type structures, power transmit directly and perform high efficiency test. A guide bar inside can help to maintain smooth in high speed, also help for extend machine’s life.

Especially the external appearance is paint by electrostatic method; it will make this testing machine always keep the best outlooks. The testing machine is suitable for all industries, companies, and factories….

Suitable for physically test for “finished products” “semi-product” ”specimen” of all kinds of materials. By using various grips/jointers/indicator this tester could apply all kinds of test, such as extension strength, stretch rate, tearing test, pilling test, adhesion test, stress test, strain test, Shearing stress test, and so forth…

Together with Powerful software function, user can make the following action according to test result: 1. Statistics charts 2. Data table 3. Print out 4. Compare various data .
This tester provides various testing functions such as tensile, compress,elongation.

This material testingequipment can completely meet your requirement.(2011/Jun/27 10:24:14)

Universal Testing Machine Material Testing Machine (QC-508B)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Tensile(Compression)Testing Machine for adhesion,spring,lamination membrane,wire,electrical component. Analyze peeling force,spring length force,tension,extension and pushing force.

This tensile(compression) testing machine has been wide used in electronic,tape ,textile...industries.

This Tester is with a multi-function indicator which can provide max and elongation value and these value can be printed.

This testing machine is coating with “Static Electricity”, able to keep good and shinning appearance; the instrument is suitable for trading company, ordinary company, factory, and all industries.

For physical experiment of all material and finished products, semi-products and specimen; by change fixtures the tensile testing machine can do all kinds of material test, such as tensile test, elongation, anti-compress, tearing, peeling, adhesive, stress, strain, shearing, etc.

Together with Powerful software function, user can make the following action according to test result: 1. Statistics charts 2. Data table 3. Print out 4. Compare various data.The test equipment evaluates material test and povide reliable data.(2011/Jun/27 10:24:14)

Universal Testing Machine Material Testing Machine (QC-513B)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A bench type Tensile(Compression)Testing Machinefor all industies materials.

Tensile (Compression) Testing Machine Bench Type is coating with “Static Electricity”, able to keep good and shinning appearance; This testing machine is suitable for trading company, ordinary company, factory, and all industries.

For physical experiment of all material and finished products, semi-products and specimen; by change fixtures this test equipment can do all kinds of material test, such as tensile test, elongation, anti-compress, tearing, peeling, adhesive, stress, strain, shearing, etc.

Together with Powerful software function, user can make the following action according to test result: 1. Statistics charts 2. Data table 3. Print out 4. Compare various data.
This small test instrument is light weight and easy to operate.

This tester can completely meet your requirement.(2011/Jun/27 10:24:14)

Universal Testing Machine High Low Temperature Tensile Tester (QC-506LWC)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A High Low Temperature Tensile Tester for industries of high-molecular, food, packing, electron and textile.

Compression (tensile) testing machine modified with high or low temperature chamber for different tensile, compression , shear test. The testing chamber can movable when it doesn't need to use.

This test equipment
have two different kind functions of material tests.To evaluate the tensile(compression,..) test and aging effect on material.This tetsing machine can meet your various test requirement an d provide reliable data. (2011/Jun/27 10:24:14)

Universal Testing Machine High Temperature Tensile(Compression) Tester (QC-506LWH)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A High Temperature Tensile(Compression) Tester for industries of high-molecular, food, packing, electron and textile.

Compression(tensile) testing machine series with a extra extending space to be used with a oven,the temperature tensile tester can provides a high temperature testing environment. Compression (tensile) testing machine modified with high or low temperature chamber for different tensile, compression, shear test.

The testing chamber can movable when it doesn't need to use. This test equipment
have two different kind functions of material tests. To evaluate the tensile(compression,..) test and aging effect on material. This equipment can meet your various test requirement an d provide reliable data. (2011/Jun/27 10:24:14)

Universal Testing Machine Extensometer (QC-515)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Extensometer is especially for high extension specimens such as rubber,metal wire,webbing,tape,...and so on.(2011/Jun/27 10:24:14)

Universal Testing Machine Impact Tester (QC-639K)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Impact tester is to impact the specimen by the force of pendulum of potential energy change to kinetic energy. When the impacting pendulum broke the specimen, the pulling angle of pendulum by residual energy would be the spare potential energy. From the diversity of two energies, determine the loss of energy value when impact. It is an objective impact test with standard data for reference. With a database impact testing machine to impact specimen under a specified "potential energy", the lost energy by damage is the endurance strength of the specimen. This impact testing machine can satisfy both CHARPY and IZOD testing methods. The plastic tester equipment offer two different kinds of testing grips and pendulums to let users select. Click view more pictures for more other related testing machines.(2011/Jun/27 10:24:14)

Universal Testing Machine Mechanical Wedge Grips (GR-F03)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Applicable for metal,wire specimen.(2011/Jun/27 10:24:14)

Universal Testing Machine Drop Dart Impact Tester (QC-633)(2011/Aug/5 14:28:59)

Fri, 5 Aug 2011 14:28:59 +0800

This machines according to ASTM D1709-75 standard to designed. And also meet testing method A & B.

It is an A & B dual function of testing machine. It is suitable for testing plastic film, sheet and lamination material of impact strength of impact resistance tester.

The hemisphere of dart head will drop down directly from specific height to impact the specimen which is testing impact of resistance.

(2011/Aug/5 14:28:59)

Universal Testing Machine Universal Testing Machine (QC-508B2)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Cometech QC-513B2 & QC-508B2 type; B2 controller serial is simplest type, controller and machine movement operate independently, provided with output signal of stop machine, collocate with different type flexible. Provided with data output function, can connect to computer and do analyses, statistics, save data with special software. Single column types include various stroke models and capacity for choosing, and apply to metal, rubber, plastic, fabric, leather, paper, component material etc. This can provide more economic solution for testing and satisfy testing requirement of finished product and semi-finished product.(2011/Jun/27 10:24:14)

Universal Testing Machine Tape Retentivity Tester (QC-801C)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Holding power Tester. This tester is aim to test the adhesive strength of tape under static load. Calculate the keeping time of tapes under a specified load, to know the adhesive strength and using life of tapes.
To adhesive the tape on the stainless steel plank and 2kg rubber pressing wheel run over it to make sure that stick on plank homogeneously. The adhesive area usually is 1 inch X 1 inch, leave it for 20 minutes to make the adhesive stuck stable, then load a certain weight( 1kg in common use) and record time from loading to come off. Can adjust the loading weight or measure the time that adhesive moves to the fixed distance to determine the quality of adhesive. (2011/Jun/27 10:24:14)

Universal Testing Machine Universal Testing Machine (QC-513B2)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Universal Testing Machine Electronic Test Stand (QC-528)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Cometech QC-528 test stand is a motor-driven type tester, designed for tensile and compression test. Small volume, light weight and precise speed, convenient for testing small specimen. Power supply using 110V-240V, suitable for testing within 500N, apply to metal wire, spring, tape, paper, electronic etc. test with various grips and fixtures.
Operate easily, could install different mechanical or digital force/tensile gauge and grips according to customer’s require.(2011/Jun/27 10:24:14)

Universal Testing Machine Vertical Torque Tester (QT-050B1)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This tester is vertical type, is used for testing torque force under 50N-M, like bottle cap, electrical component, able process breaking torque, torsion fatigue and angle of torsion fatigue test, and increase positive press on specimen. Length of specimen can be adjusted by up and down function of machine.(2011/Jun/27 10:24:14)

Universal Testing Machine Standard Pneumatic Plane Grips (GR-H03)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Standard Pneumatic Plane Grips, using atmosphere to rapid clip grip tightly, the clip tight force can be adjust and let the specimen will not happen the phenomenon of cut or fall off. Option for manual control switch or pedal control switch.
(2011/Jun/27 10:24:14)

Universal Testing Machine COATING / PRINTING TESTER (QC-621D)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This tester is for test the discoloration for abrasion-resistant of painting surface, use white cotton cloth to test the discoloration condition, or use abrasion rod to test the abrasion-resistant.(2011/Jun/27 10:24:14)

Universal Testing Machine Tensile (Compression) Testing Machine (QC-513B1)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Material testing machines
can analysis the whole
testing result including
elongation, stress, strain,
break value and average
value. It can also fit to
different specimen shape or
be required to destroy the
specimen and record the
entire testing process and
analysis the physical
features of the specimen
like tension force, bending
strength, wear-resisting,
impact, torque force,
abrasion, fatigue, hardness,
peeling force, viscosity...
etc. We also supply the
specimen maker equipment
like pneumatic specimen
press, hardness specimen
cutting device, electrical
forming machine. These
equipment can make the
standard specimen to get
precise result during test.
This is a new light type device which adopts latest design and skill to have strong but smaller and lighter structure. Still keep the advantages of testing precision, simply operation, extend strong. It is the best choice for small capacity.(2011/Jun/27 10:24:14)

Universal Testing Machine X-Y Table Grips (GR-I01)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

X-Y Table Grips is able to adjust X axle by grip.(2011/Jun/27 10:24:14)

Universal Testing Machine Universal Testing Machine (QC-505B2)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Cometech QC-505B2 type; B2 controller serial is simplest type, controller and machine movement operate independently, provided with output signal of stop machine, collocate with different type flexible. Provided with data output function, can connect to computer and do analyses, statistics, save data with special software. Single column types include various stroke models and capacity for choosing, and apply to metal, rubber, plastic, fabric, leather, paper, component material etc. This can provide more economic solution for testing and satisfy testing requirement of finished product and semi-finished product. Bench type, convenient for operating, small volume with strong structural.(2011/Jun/27 10:24:14)

Universal Testing Machine Material Testing Machine (QC-501B1)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Description
Rigid frame structure is not easy to be deformed. Precise servo motor and such as ball screw driving parts supply with stable test speed. Strong and functional computer system provides a complete test function; assemble with different grips/accessories are able to do various material test.(2011/Jun/27 10:24:14)

Universal Testing Machine Zipper grips (GR-K01)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Applicable for zipper specimen.(2011/Jun/27 10:24:14)

Universal Testing Machine Small Narrow Grips (GR-K03)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Use in small specimen and use wing screw to enhance the power of tight.(2011/Jun/27 10:24:14)

Universal Testing Machine Carton Compression Tester (QC-101B)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This Carton Compression Tester provides a environment to test the compression resistance of carton.

With this test equipment Packing container like carton, while they are during transportation or using, will become deformed due to pile up and compress.

This testing machine is to use a fix speed to compress and test the specimen, and to obtain the compress endurance, when the container is broken, this instrument will stop automatically, and hold the max.

This instrument is suitable for packing industries. The tester can meet your test requirement and supply solutions of low cost.(2011/Jun/27 10:24:14)

Universal Testing Machine Material Testing Machine (QC-506B2)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Material Testing Machine QC-506B2 include standard, extend length type, and conform with various testing request to providing best test state for the different between specification of specimen, testing environment, testing force etc. This type is suitable for testing within5KN capacity.
Table type, convenient to operate, small volume and strong structure won’t occupy space, transmission efficiency more than 85%, less energy loss and high precision, operate easily, could connect to computer. (2011/Jun/27 10:24:14)

Bursting strength tester Digital Bursting Strength Testers (QC-115D)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Digital Bursting Strength Tester apply to textile industries,shoes,paper,food,electric,electric appliances,cable wires,handbag,bicycle,metal,furniture,etc.

Digital Bursting Strength Tester provides a hydraulic laod under a rubber diaphragm of a specific area to test the burst strength of textile,paper, corrugated cardboard,carton box,card board, leather , cloth, synthetic leathers,etc.

The precision instrument is suitable for industries such as shoes ,paper,food,electric, electric appliances,cable wires, handbag,bicycle,metal ,furniture,etc.Simple to operate,this tester evaluates material test and provide reliable data.The tetsing machine can meet your requirement.(2011/Jun/27 10:24:14)

Bursting strength tester Bursting Strength Tester (QC-115)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Bursting Strength Tester apply to textile industries,shoes,paper,food,electric,electric appliances,cable wires,handbag,bicycle,metal,furniture,etc.

This Bursting Strength Tester use oil pressure to break specimen through the rubber film.

This tester is used to test the breaking strength of paper , leather , taxtile and etc.

The instrument provides a hydraulic laod under a rubber diaphragm of a specific area to test the burst strength of textile,paper, corrugated cardboard,carton box,card board, leather , cloth, synthetic leathers,etc.

Die cutters and die cutting machines Manual Forming Machine (QC-601)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Manual Forming Machine for preparing a specimen of rubber,plastic materials,like tension specimen,bending specimen etc.

Testing Machine of Manual Forming Machine is to make the materials like plastic or rubber into a standard flat shape specimen under high pressure and high temperature, to obtain a uniform shape for testing the material characters such as: transparent level, impact resistant, tensile resistant.

This instrument provide a stable temperature and pressure enviroment for tensile,impact test or color comparison sample production.

For this tester put the plastic (or rubber) material inside the casting mold, in between the upper and lower heating plate, implement pressure and temperature, to form the material into a standard shape to be a sample to serve for test, or to be an example of color comparison, also to be example before mass-production.

This instrument can completely meet your requirement for specimen and supply solutions of low cost.Meantime this test equipment offer a handy operation.(2011/Jun/27 10:24:14)

Die cutters and die cutting machines Electrical Forming Machine (QC-602)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Electrical Forming Machine for preparing specimen of rubber,plastic materials, like tension specimen, bending specimen etc.

Hydraulic power supply provides a stable out pressure. Electrical Forming Machine is especially for larger specimen and capacity.

Place plastic or rubber material into the casting mold ,grip it between upper and lower heating plate, apply pressure and certain temperature, to form the material into a standard shape to be a sample to serve for test, or to be an example of color comparison, also to be example before mass-production.

This instrument make the specimen more perfect and more suitable to test.This tester can reduce your loss on the process of forming specimens. (2011/Jun/27 10:24:14)

Die cutters and die cutting machines Manual Specimen Punch (QC-603)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Manual Specimen Punch(cutter) for cutting flat and soft paper,rubber,plastic materials into samples or standard shape specimen.

This specimen punch is able to coordinate with various cutters to cut them into samples or into standard shape specimen.

This instrument make the material ready for tensile resistanttest/ tearing/elongation/ aging /sample ,and other test.

The test equipment is suitable for soft material such as paper , rubber, soft plastic, polyfoam...etc.Simple to operate,this tetser provide you a easy way to get the standard sample.(2011/Jun/27 10:24:14)

Die cutters and die cutting machines Pneumatic Specimen Press (QC-603A)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Pneumatic Specimen Press(cutter) for cutting flat and soft paper,rubber,plastic materials into samples or standard shape specimen.

Testing Machine of Pneumatic Specimen Press is able to coordinate with various cutters to cut them into samples or into standard shape specimen.

Ready for tensile resistant test, tearing test, elongation, aging, sample, and other tester. This tester is suitable for soft material such as paper, rubber, soft plastic, polyfoam, etc..

Pneumatic specimen press takes advantage of pneumentic compress to provides an automated media force to give a easy and clean cutting enviroment foe specimen preparation v.

This test product can meet your testing requirement and supply solutions of problems. (2011/Jun/27 10:24:14)

Die cutters and die cutting machines Cutter for Hardness Specimen (QC-603B)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Cutter for Hardness Specimen to produce specimen from hard materials rubber, plastic for tensile, impact, compression test.

Cutter for Hardness Specimen can make the specimen more suitable to do the test and have the test more accurate.

When the specimen is hard or thick, cannot be cut into necessary shape with ordinary cutter, normally, we will form them with casting mold; or use this testing machine to coordinate with mold, use mold-close method to process out specimen appearance.

This tester supply a very approiate way to make the hardness specimens and lowe the produced cost.

This instrument apply to produce specimen from hard material for tensile,impact,compression test. (2011/Jun/27 10:24:14)

Die cutters and die cutting machines Impact Specimen Angle Cutting Device (QC-640)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Impact Specimen Angle Cutting Device for rubber, plastic specimen, this machine can cut various depth V shape according to different standard.

Testing Machine of Impact Specimen Angle Cutting Device is to cut a standard V shape ditch; this testing machine is also available for product U shape or other concave shape specimen, to fits all different standard of test.

Before doing impact endurance test, to cut a RO.25 V shape ditch on standard specimen is necessary; this test meter is able to cut various depth according to different standard.

To produce a pre-determined depth of angle for different impact test specimen material,this instrument has double thickness gauges and speed adjust for depth measurement.

This test equipment can meet your test requirement and supply solutions of low cost. (2011/Jun/27 10:24:14)

Die cutters and die cutting machines Cutters For Circular Samples (QC-PS)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Cutters For Circular Samples of textile, paper and leather materials.

This testing machine is designed to cut out, rapidly and accurately, circular specimens of a particular fixed area or diameter, from virtually any type of material, including woven, non-woven and knitted textiles, carpet, film, foam, paper and board.

This insturment is strongly needed by Clothing, Dyeing and similar factory.This shape specimen made form the sample cutter is mostly used in test such as bursting and puncture.(2011/Jun/27 10:24:14)

Abrasion resistance Testers Surface Hardness Abrasion Tester (QC-621K)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Surface Hardness Abrasion Tester QC-621K
is for test the discoloration condition and abrasion-resistant of painting surface such as coating, electroplating dyeing by using white cotton cloth、eraser、steel wool to test the abrasion-resistant of specimens.

The setting can be modified according to different speed, stroke, specimen size, abrasion head, load…etc.(2011/Jun/27 10:24:14)

Abrasion resistance Testers Matierial Testing Machine (QC-502B1)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Abrasion resistance Testers Abrasion Tester (QC-618A)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A brasion tester for test wear & tear of material rubber,plastic,belt,shoe sole,tire,conveyor.

1. Testing Machine of Abrasion tester is mainly to test the abrasion-resistant and tearing-resistant of rubber (or other elastic material).

2.This test machine is suitable for testing tire, conveyor belt, transmission belt, and shoe sole, etc.,the tester is general opinion that this testing method is most precise among all abrasion test methods.

For material,belt,shoe,tire,conveyor are subject to wear and tear during their working life.

This abraser serves for the determination of the resistance of elastomer in regards to the loss of abrasion.

This precision instrument evaluates material test.(2011/Jun/27 10:24:14)

Abrasion resistance Testers Abrasion Tester (QC-619K)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Abrasion tester for test material plastic, rubber,plywood,glass,painting,textile.

Abrasion Tester is designed to use specified grinding wheel with specified load to rub the surface of specimen, and after a setup number of timer of abrasive, evaluate the following conditions of the surface after test, and ratio the endurance characteristic of abrasion for this material.

.
The inspected points of this tester are as following,
1. Worn out condition.
2. The loss of the weight.
3. The loss of the physical volume.
4. The thickness that been worn out, etc.

Use NBS standard gum to ratio the endurance characteristic of abrasion for this material.

For material plastic, rubber, plywood, glass,painting,textile,...etc.,this test equipment provides a wide range test through different grinding wheel.

The specimen after test can be judged the resistance by the loss of surface.

This precision instrument evaluates material test. Simple to operate,this tester has been accepted worldwide as a reference for wear and abrasion research,quality and process control,and materials evaluation.

Abrasion tester are capable of supplying reliable data soon. (2011/Jun/27 10:24:14)

Abrasion resistance Testers NBS Abrasion Tester (QC-617N)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This NBS Abrasion Tester is mainly to test materials like vulcanized rubber (such as sole of shoes).

This tester is mainly to test materials like vulcanized rubber (such as sole of shoes).

Testing method of this instrument is to grind 1“ ×1” standard gum i2.54 mm, record the rotary counts, and use the same method to grind 1“×1” specimen 2.54mm, record the turn counts, and calculate the NBS value as following formula:
NBS formula: (Turning counts of grind specimen 2.54 mm ÷ Turning counts of grinding standard gum 2.54 mm) ×100 = NBS value.About this test equipment
a load will be put on the specimen to be ground with roating grinding paper to check the consumption,which can be compared with a standard rubber to get a more objective result.

This testing machine can meet completely your requirement and supply you the solutions of all problems.(2011/Jun/27 10:24:14)

Abrasion resistance Testers AKRON Abrasion Tester (QC-615A)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A AKRON Abrasion Tester for testing materials of rubber,PU,EVA.sole,tire,caterpillar treads or tracks of a tank, etc.

Akron Abrasion Tester is suitable for the test of products made by rubber, PU, EVA, etc. Such as: sole, tire, the caterpillar treads or tracks of a tank, etc.

The method is use specimen forming machine (Refer to our QC-601, QC-602), to make a circular specimen at thickness 13mm, diameter 63mm, and inner hole diameter 13mm.

If such specimen cannot be made by mold, take a strip shape specimen at length 220mm, width 12.7mm, thickness 13mm, paste on a round shape rubber plate (outer diameter 60.5mm, thickness 13mm, hardness Shore A 60° - 70°), the connection part of this strip shape specimen should be cut into slanting and opposite facing, make two ends match well after connected, and not loosing, make the round shape specimen gripped on the specimen holder at 15°, apply 2pounds or 6pounds of load, and grinding with #40 grinding wheel, after 2000turns or 3000turns, calculate the quantity of abrasion.

Specimen should use “Specific gravity meter” to measure the specific gravity before testing and after testing, and weight before abrasion and after abrasion.(2011/Jun/27 10:24:14)

Abrasion resistance Testers Manual Crock Meter (QC-621A)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Manual Crock meter is for testing discoloration level of textile or leather; the method to this tester is grip the specimen onto a rub-platen fixing device, and wrap a 5 cm x 5 cm white cotton cloth on the rub-hammer on above, the diameter of rub-hammer is 16 mm, central load is: 900 g, abrasion distance is 10 cm, use abrasion speed at 1time / 1sce to rub the specimen, total 10 times of "back and forth" (or other specified number of times), take out the white cotton cloth to compare with "gray scale for staining", for evaluate discolor level of this specimen. Simple to operate and lower cost, this instrument has been accepted widely.

This precision tetser evaluates materail test result. (2011/Jun/27 10:24:14)

Abrasion resistance Testers FPC Flexible Testing Machine (QC-119 )(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This FPC Flexible Testing Machine specialized in testing the using life of flexible circuit in its motion directions(2011/Jun/27 10:24:14)

Falling mass Test Dropping Impact Testing Machine (QC-637)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Dropping Impact Testing Machine for materials of rubber, plastic.

Dropping Impact Testing machine is to test the impact endurance of brittle material like: plastic, ceramic, acrylic, and etc.

This test equipment is a general method to compare the material impact endurance.

The method of this testing machine is: use a specified weight of steel ball, adjust to a certain height, free drop and impact the specimen directly, evaluate the damage level to adjust the quality.

Simple tester provides standard steel balls from a certain height to hit the specimen to consider the quality after damage.

This instrument can meet your testing requirement and supply you the solutions of low cost. (2011/Jun/27 10:24:14)

Falling mass Test Impact Tester (QC-639)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Universal Impact Tester by force of pendulum to test materials of rubber, plastic.

This impact tester is to test the traction of plastic, rubber through a specimen load pendulum. Izod and charpy testing method are both included in this universal impact tester.

This is an objective method, with a database impact tester to impact specimen under a specified "potential energy", the lost energy by damage is the endurance strength of the specimen.

This tester is suitable for plastic industries, the related test product of this impact tester is impact specimen angle cutting decice. These two test equipments can do the best matches.

The instrument can meet your test requirement and supply solutions of loe cost.(2011/Jun/27 10:24:14)

Falling mass Test Universal Impact Tester (QC-639A)(2011/Mar/16 16:14:54)

Wed, 16 Mar 2011 16:14:54 +0800

DESCRIPTION
This is an objective method, with a database impact tester to impact specimen under a specified ��potential energy��, the lost energy by damage is the endurance strength of the specimen. (2011/Mar/16 16:14:54)

Falling mass Test Dupont Impact Tester (QC-641)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Dupont Impact tester is aim to test the impact endurance of rubber, plastic coating material (after coated); The coating face of specimen face up, connect with specified radius “Impact Head”, use a certain “Weight” to impact the “Impact Head” on a fixed height, after impacted, check the damage of coating or deformation.
This testing machine is for realizing the resistibility of coatings to the effect of rapid impact.The instrument can completely meet your requirement. (2011/Jun/27 10:24:14)

Falling mass Test Digital Impact Tester (QC-639F)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Digital Impact Tester is designed to measure how many capacity it need to break the brittle material, this capacity could be recorded as the impact strength of the material.
The value of capacity will show on LCD, you don’t have to do complicated calculation.There are Two kinds of pendulum for select.They are Izod and Charpy pendulums. (2011/Jun/27 10:24:14)

Falling mass Test Vertical Rebound Tester (QC-638)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This Vertical Rebound Tester is for testing the elasticity of rubber material. Use a certain shape of dropping hammer, drop from 400㎜ height, drop and observe the rebounding level, to evaluate the elasticity of the material.

While testing with vertiacl rebound tester, the position should 14㎜away from the edge, and pre-impact 3 times, take the test result of 4th, 5th, 6th, and calculate the mean average, that is the elasticity of characteristics of the specimen.

The testing machine can meet your requirement and supply you the reliable data.(2011/Jun/27 10:24:14)

Torsion durability Tester Digital Hardness Tester (Model: 206EX ( R ) )(2011/Jul/26 17:05:35)

Tue, 26 Jul 2011 17:05:35 +0800

The hardness tester 206 EX is a motorized model with load cell aligned with the indenter to achieve Rockwell hardness tests HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK and generate fingerprints Vickers HV10 - HV60 - HV100.

Versatile hardness tester for use in the workshop and laboratory, designed to control any type of material. Pressing the wheel base you perform the contact with the surface to be examined, moving the upper lever, automatically, applies the load preset.The result appears immediately on the digital display. Does not need to be level and can also work closely with vibration

(2011/Jul/26 17:05:35)

Torsion durability Tester Closure Torque Tester (QC-T60)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Closure Torque Tester for testing the torsion force of bottle top.

The closure torque tester has been specifically designed to measure the torque performance of tamper-evident closures and seals.

Traditioinal spring-type torque testers have proved unsuitable for this task due to their inherent variability and low accuracy.(2011/Jun/27 10:24:14)

Torsion durability Tester Torque Tester (QC-T100A1)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A Torque Tester for light force torque as closure, packing cap, and spring.
Torque tester is especially for light force torque such as closure, packing cap, and spring, this tester is with a up down function to adjust the height for different specimens.

This testing machine is to test the torque force of electronic, manual , pneumatic tools and screw, screw nut.

This precision instrument evaluates light force torque.The tetser can meet your requirement and supply reliabel data.(2011/Jun/27 10:24:14)

Torsion durability Tester Spring Testers (QC-901)(2008/Jun/25 15:55:27)

Wed, 25 Jun 2008 15:55:27 +0800

A spring tester for testing using life, fatigue of spring by one touch screen.

Draw (press) spring fatigue testing machine is appliable test the same specimen 5pcs at the same time and set up by various testing travel, speed,etc.

It will test by 1x10⁹
times and easy operate by touch screen.
This machine speialized in testing-large range, fast speed, adjustable and it��s best choice for spring fatigue testing.(2008/Jun/25 15:55:27)

Torsion durability Tester Spring Testers (QC-902)(2011/Mar/16 16:32:49)

Wed, 16 Mar 2011 16:32:49 +0800

Spring Testers for testing fatigue of torsion of spring. Max. 4 specimens are available to be tested together at same time.

Spring twist test machine specialized in large test range, fast speed, test angle operated by program.

The tooling made by separated design able to cooperate with different tooling.

Spring twist machine is the best choice because allow all kinds of specimens.(2011/Mar/16 16:32:49)

durability tester Aging Oven (QC-607)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This aging oven simulates a high temperature environment. This situation can speed up the aging process.

With a tensile and elongation change before and after aging to evaluate the character by this instrument.

This tester is for durable test of rubber/plastic materials, for obtain the difference between tensile strength and elongation.
Normally, the testing temperature under this instrument is 70℃, testing period is according to producer-consumer acceptance.

The general opinion of this testing machine is: the specimen inside this Aging Oven 24hours, setting: 70℃, is equivalent to the result of any natural exposure 6 months. (This instrument also provide baking oven function).(2011/Jun/27 10:24:14)

durability tester Electric Plug/ Cord Bending Tester (QC-659)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A bending tester to test the using life of joint between plug and cord.

This testing machine can completely meet your requiement and supply you solutions of all problems.

The cord connection joint of ordinary electric plugs bends very often in use.

This situation severely affects the use life of joint between the cord and the plug.

This electric Plug/ Cord Bending Tester mainly aims at the bending endurance of products joint related to electrical plug and cord.

The testing method of this instrument is: use grip to hold plug at upper side, attach a standard weight on lower side of the connecting cord, series connect 6 cords at one time, bending continuously until the cord break or achieve the setting number of times.

The test results of this tester are reference for quality.(2011/Jun/27 10:24:14)

durability tester Holding Power Testers (QC-801)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This tape tester is aim to test the adhesive strength of tape under static load.

Holding Power Testers is designed to perform room temperature shear tests for tape under a specific load.

1. This tester is aim to test the adhesive contact strength of tape under static load.

2. This instrument provide the information for tape adhesive contact pressure evaluation.

3. The constant pressure in oven of this testing machine is also available.
This test equipment can meet your requirement of test and is handy to operate. (2011/Jun/27 10:24:14)

durability tester Holding Power Chamber (QC-802)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This tester is used for test tape adhesive strength under high temperature and constant-temperature motionless static load condition.

This testing machie is used for test tape adhesive strength under high temperature and constant-temperature motionless static load condition.

Calculate the keeping time of tapes under a specified load, to know the adhesive strength and using life of tapes.

The method of this instrument is to cut a one-inch width strip type tape, stick on a specified SUS#304 stainless steel, the paste area is 1“×1”, loading with 2kg standard roller wheel under 300mm/Min speed, roll back and for the one time, and hang the stainless steel onto this tester.

Use Connector to connect the lower part of tape with Loading Weight, make the tape bearing the specified load, at this time the timer will calculate automatically; after the tape dropped from the stainless steel board, timer will hold the testing time automatically, this time data can be a database for Q. C. person to evaluate the tape adhesive strength.This instrument is especially for tape industry.(2011/Jun/27 10:24:14)

durability tester Motor Roller (QC-803K)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This Motor Roller ensures that tape test sample is prepared in the constant pressure and speed.

This Instrument Motor Roller tester was designed and manufactured by us based on JIS-C-2107, JIS-Z-0237 standard.

Before tape is exerted under a retentive test, the testing machine must be completely bonding the glue on the steel board (stainless), so as to get the most correct testing results.

This tester is motor type.The test equipment can meet your requirement.(2011/Jun/27 10:24:14)

durability tester Manual Roller (QC-803A)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

The manual roller is for tape test sample preparation.

This tester is manual type.
Before tape is exerted under a retentive test (or peeling test), it must be completely bonding the glue on the steel board (stainless), so as to get the most correct testing results.

This testing machine can meet your requirement.The precision instrument supply you the reliable data and solutions of lower cost. (2011/Jun/27 10:24:14)

durability tester Tape Initial Adhesion Tester (QC-805)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This tape tester was design for testing adhesive strength of tape products.

Tape Initial Adhesion Tester was design for testing adhesive strength of tape products; judge the initial adhesion strength by the rolling distance of steel ball.

This testing machine can meet your requirement and supply you the reliable data.Also the instrument provide the solutions of lower cost.(2011/Jun/27 10:24:14)

durability tester Tape Initial Adhesion Tester (QC-805A)(2011/Mar/16 16:25:24)

Wed, 16 Mar 2011 16:25:24 +0800

This Tape Initial Adhesion Tester is to test the tape initial adhesion distance with steel ball.

This Tape Initial Adhesion Tester was designed for testing adhesive strength of tape products; the testing machine can judge the initial adhesion strength by the rolling distance of steel ball.

This instrument can meet your requirement and supply you the reliable data.Also the tester provide the solutions of lower cost. (2011/Mar/16 16:25:24)

durability tester Tape Initial Adhesion Tester (QC-805P)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A tape tester to test a tape initial adhesion distance with steel ball.

This testing machine tape inital adhesion tester is according to PSTC-6.The testing machine provide a 21.3 degree angle runway to test a tape initial adhesion distance with steel ball.This instrument can meet your requirement for adhesion test and supply the reliable data. Also the tester provide the solutions of low cost. (2011/Jun/27 10:24:14)

durability tester Wire Heating & Deformation Tester (QC-663)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This wire tester is to soften the wire material and keep pressing a period of time to observe transfiguration.

Wire will accumulate heat for a long time of electrifying; it damages the wrapped insulation materials especially when the wires are pressed by heavy stuff.
This equipment provides a high-temperature environment to soften the material and attached with Standard-Weight, keep pressing a period of time, observe transfigure.(2011/Jun/27 10:24:14)

Testing machine MIT Folding Endurance Testing Machine (QC-104)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

A MIT Folding Endurance Testing Machine for testing folding endurance of materials of circuit soft board, copper foil, paper etc.

Testing Machine of MIT Folding Endurance Tester is to test the folding endurance of metal foil, paper card board, will go through bending (or similar) motion, if material cannot pass through this bending test of this testing machie, will affect the quality of product.

That is the main purpose for design this material testing machine: to preset a constant tension reciprocate bending from side to side, to evaluate the endurance of material by the number of times of folding to broken.

This tester can meet your testing requirement of using material.
The test equipment is suit for various
industries.(2011/Jun/27 10:24:14)

Testing machine Drop Tester (QC-113A)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Drop tester driven by pneumatic cylinder, single wing structure, only takes a small space to operate, suitable for package dropping impact endurance test, such as carton, luggage case, suitcase, electric equipment, etc. By testing with falling down with this machine , we can more sure how the goods safety and complete when being delivered.(2011/Jun/27 10:24:14)

Testing machine Holder for Hardness Gauge (QC-GS)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

When use hardness tester to do test on rubber or plastic, normally user holds the meter by hand and doing the hardness test; although the hardness meter is convenience, but if the required error range is small, this method is not objective.

That is why we design this hardness stand to do the measurement; the tester has all the good points:
1. Accuracy is high
2. Easy to use
3. Reduce mental error
4. Extend the using life of hardness tester (Because the hardness gauge is fixed on stand) Material Standard Load Foam, PU, Rubber, Soft Plastic SHORE A 、C TYPE 1㎏ Hard Plastic, Hard Rubber SHORE D 5㎏.(2011/Jun/27 10:24:14)

Testing machine Digital Hardness Tester (Mod. 270 RSD (R))(2011/Jul/26 17:15:42)

Tue, 26 Jul 2011 17:15:42 +0800

The hardness tester 270 RSD is a motorized model with load cell aligned with the indenter to achieve Rockwell hardness tests HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK

and generate fingerprints Vickers HV10 - HV60 - HV100. Universal hardness tester with direct real measured values. Measuring head with a stroke of 50mm and press piece. Pressing a single lever boot, the measurement head down to the contact with the surface to examine the blocks, performs the measurement and dates, all without interruption. It automatically compensates for any movement or flexing of the piece during the measurement of 50mm and provides a perfect reading already the first test and in all operating conditions. Does not need to be level and can also work closely with vibration.

(2011/Jul/26 17:15:42)

Testing machine Stiffness Tester (QC-643)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This stiffness tester is for Test the stiffness of fine, thin material such as bristle, soft sheet…etc.

This instrument is to determine the pushing force of bristle and soft material with a specific length and angle.

By this test equipment you can inspect the soft or hard degree of the bristle.That is this testing machine can do the flexibility and resiliency test.This precision instrument evaluates material stiffness. (2011/Jun/27 10:24:14)

Testing machine Abrasion tester (QC-621F )(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This tester specialized in testing the color fasten of painting specimens. By using a specific rubbing head to rub the surface of specimen with specific load to determine the fasten condition of color of specimen.(2011/Jun/27 10:24:14)

Testing machine Oven (QC-605)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This oven is suitable for usage of drying/baking/pre-heating ,all kinds of material/specimen/finished products within temperature under 200℃.

The heating system of this instrument is heating-recycle system. the tester maintain homogeneity temperature inside the whole chamber.

With thermo-protector on thie test equipment to prevent dangerous occurred from over-heating caused by damage of Temperature-Control unit/parts. (2011/Jun/27 10:24:14)

Testing machine Discoloration Chamber (QC-609A)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This Discoloration Chamber provides a high temperature and ultraviolet (UV) rays environment.

In this situation, the white or light material will have some changes to evaluated the grade.

This tester simulate the specimen becomes fading or discoloring caused by radiation of Ultraviolet ray or heat, to observe the durable degree of discoloration.

The term “discoloration” applies to a color change of the rubber sample, as distinguished from staining, that refers to a color change of a metal finish in contact with or adjacent to
the rubber specimen.

Testing period of this testing machine is according to producer-consumer acceptance.

Complete accessories. Multiple usages. The instrument is a basically Discoloration-Instrument, also
provide Aging Oven/Banking Oven function. Various functions are in this test equipment.(2011/Jun/27 10:24:14)

Testing machine Discoloration Meter (QC-609B)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This discoloration meter provides a high UV tube with a wavelength 253mm to test a material's charactor after expose to the light.

This tester simulate the specimen becomes fading or discoloring caused by radiation of Ultraviolet ray or heat, to observe the durable degree of discoloration.

Generally opinion is 3 hours of continuously test with this instrument is equivalent to 60days in Transport container.(2011/Jun/27 10:24:14)

Testing machine Freezing Chamber (QC-703)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This Freezing Chamber imitates various temperature environments for products and materials reservation and test the reaction of material to temperature.

This testing machine uses high precision microcomputer touch sense temperature controller.

This tester is able to create various temperature environment- low temperature, high temperature- separately.
Therefore,the instrument is most suitable for food/medicine storage, or to test the reaction of material to temperature. (2011/Jun/27 10:24:14)

Testing machine Salt Water Spray Chamber (QC-711)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Salt Water Spray Chamber is for testing the rust resistance grade of surface treatment of eletro-plating, paint coating, anodizing.

This testing machine Salt spray tester is used for testing rust-proof treatment of material, such as metal surface that after painting, coating, electroplating, anodizing, films of organic and non-organic…etc. It’s a corrosion and Rust-Resistant test.

This Test Equipment is for checking the corrosion-resistant of products (specimen) under long time corrosion after treatment like anodize, rustproof oil, chemical, etc.(2011/Jun/27 10:24:14)

Testing machine Compression & Deformation Tester (QC-631)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Compression & Deformation Tester is for testing vulcanized rubber under a specified constant compression or tearing force.

This Compression & Deformation tester Machine is designed for testing vulcanized rubber under a specified constant compression or tearing force, and exerting heat condition, to check the permanently deformation rate of the material. (Refer to CNS-3560; K6351)This testing machine can meet your requirement and supply the reliable data.(2011/Jun/27 10:24:14)

Testing machine Screw Puncture Tester (YY-S20)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Screw Puncture Tester is to determine the ability for a screw to punch a plate.

This tester machine can adjust the rotating speed and loading, and also can connect to a program for data communication and calculation.the instrument supply the reliable data.

The testing machine provide a constant load and speed to test how long would it take to go through a steel plate.The screw puncturer can meet your requirement.(2011/Jun/27 10:24:14)

Testing machine Color Viewing Booth (QC-701A)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Color Viewing Booth can provide various light sources for color comparison for printing, coating, textiles, fluorescence, etc....Stimulate light source made according to C.I.E. daylight (Color temperature 6504°K
Color temperature 5000°K), color performance evaluation: over RA96.

Color Viewing Booth is very handy to operate and meet your testing requirement. (2011/Jun/27 10:24:14)

Testing machine Water Penetration Tester (QC-317A)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Water penetration tester tests water penetration of waterproof material by a raising cup.

To determine the water-tolerant of waterproof textile, the tester has high and low pressure testing methods.

This tester is aim to test the water permeability-resistance degree for Water-Resistance fiber (or other material), uses pneumatic grip to speed up the testing time.
There are three kinds of Test method for thie testing machine:

a. Water pressure method: Put dry specimen to cover on water surface.
Then record the water level (cm) at once after the specimen occurred 3 places permeated by water on its surface.

b. Certain water pressure method: Put dry specimen to cover on water surface. Use 1cm/sec speed to raise water level up to a certain level, then record the time (sec) at once after the specimen surface occurred 3 places permeated.

c. Water leakage: operation method same as water pressure. Just stop water level rising immediately when water lever rising up to a certain position (10cm), to test the water leakage capacity within 1 certain time.

The precision test equipment evaluates material test and provide reliable data.(2011/Jun/27 10:24:14)

Testing machine Material Testing Machine (QC-505B1)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Description
Rigid frame structure is not easy to be deformed, equipped with two test spaces. Precise servo motor and such as ball screw driving parts supply with stable test speed. Strong and functional computer system provides a complete test function; assemble with different grips/accessories are able to do various material test.(2011/Jun/27 10:24:14)

Testing machine Water Penetration Tester (QC-317C)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Water Penetration Tester is for testing water penetration of waterproof material.

This testing machine water penetration tester is aim to test the water permeability-resistance degree for Water-Resistance fiber (or other material), uses pneumatic grip to speed up the testing time.this instrument can meet your requirement and supply solutions of lower cost.(2011/Jun/27 10:24:14)

Testing machine Water Penetration Tester (QC-317D)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Water Penetration Tester is for testing water penetration of waterproof material.

This testing machine Water Penetration Tester is aim to test the water permeability-resistance degree for Water-Resistance fiber (or other material), uses pneumatic grip to speed up the testing time.(2011/Jun/27 10:24:14)

Testing machine Digital water penetration tester (QC-317E)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Digital Water Penetration Tester is for testing water penetration of waterproof material.

Digital water penetration tester is aim to test the water permeability-resistance degree for Water-Resistance fiber (or other material), uses pneumatic grip to speed up the testing time.

To determine the water-tolerant of waterproof textile, the tester has high and low pressure testing methods. Also, the instrument can connect with computer to extend functions.There are three kinds of Test method for this test equipment:

a. Water pressure method: Put dry specimen to cover on water surface.
Then record the water level (cm) at once after the specimen occurred 3 places permeated by water on its surface.

The presision testing machine evaluates material test and provide reliable data. (2011/Jun/27 10:24:14)

Testing machine Portable Type Water Penetration Tester (QC-317M)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Portable Type Water Penetration Tester is for testing water penetration of waterproof material.

This water penetration tester use a pump to increase the pressure in specimen. When the specimen can't afford the pressure ,water start leaking.The pressure on the gauge is the anti-water penetration force.The main function of this tester is aim to test the water pressure-resistance for waterproof fabric or other material, to obtain a precise water-resistance level for the material.
The instrument can be switch between high pressure and low pressure, and the test equipment is portable, very convenient for the member of Quality control department or purchasing department to go out for inspection.(2011/Jun/27 10:24:14)

Testing machine Manual Wrap Reel (QC-301)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This manual wrap reel is to count the length of yarn, is for winding yarn thread with required length , and then tests its LEA strength: also for calculating the yarn-measurement.

This tetsing machine is for winding yarn thread with required length, and then tests its strength of lea and quality; also for calculating the yarn-count. Circumference is adjustable; this will put the yarn thread in order, and will not mess up the yarn thread, also to prevent overlapping, too.

When revolving, a multiple device in this instrument can reduce the counts and time of revolving.

Use counter to read the instant winding-revolution.The precision test equipment evaluate material test and provide reliable data.
(2011/Jun/27 10:24:14)

Testing machine Motor Wrap Reel (QC-302)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This motor wrap reel is to count the length of yarn. Wrap reel winds yarn thread with required length, and then test its strength of lea and quality, aso for calculating the yarn-count.

There are many system of yarn count, but most general use is “Tex” and “Denier, D".

Though there are many kinds of yarn-measurement method, the main difference among them is only at “length” and “unit”

This tester is to preset a certain and specified length, work together with balance, user can measure the level of Tex or Denier.

Also can test “LEA strength” by wrapping a specified length of yarn.

The instrument is simple to operate and provide reliable data. (2011/Jun/27 10:24:14)

Testing machine Material Testing Machine (QC-506B2)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Description
Cometech QC-506B2 include standard, extend length type, and conform with various testing request to providing best test state for the different between specification of specimen, testing environment, testing force etc. This type is suitable for testing within5KN capacity.
Table type, convenient to operate, small volume and strong structure won’t occupy space, transmission efficiency more than 85%, less energy loss and high precision, operate easily, could connect to computer. (2011/Jun/27 10:24:14)

Testing machine Motor Twist Counters (QC-309)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This Motor Twist Counters is to count out the number of twist by un-twisting yarn thread, and then division by length of specimen to obtain the number of plied twist per inch.

Testing Machine of Motor Twist Counter is to test the "Twisted Level" and "Twisted Shrinkage" of "Single Fiber" or "Twisted Fiber".This Meter comply with “Clockwise or Counter Clockwise” and “Addition and Subtraction function”, fits the test of “S” direction and “Z” direction for “Twisted Fiber”.

This tester is suit for both "Single and Dual Fiber" "Twisted Fiber" minimum order.To determine the single or plied yard twist with specific load through un-twist and re-twist method.This instrument is very suit for textile & yard industries to inspect the qualities of using materials.The testing machine can meet your requirement and is handy to operate.(2011/Jun/27 10:24:14)

Testing machine AATCC Perspiration Tester (QC-315)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

This AATCC Perspiration Tester is to test the endurance of perspiration of fibers, cloths.

AATCC Perspiration Tester is designed to test the endurance of perspiration for colorists, for all fiber (cloth).The testing machine can meet your requirement.
Use compound specimen to soak in artificial perspiration resolution (Separately in Acid and alkali) completely, natural dry for 30minutes, and then use this tester to apply a constant pressure , then put it in 37°Cdrying oven for 4 hours, take out specimen, make it dry , compare with gray scale to evaluate the perspiration-resistancelevel(suitable for all kinds of fiber)(2011/Jun/27 10:24:14)

Testing machine Dyeing Rubbing Tester (QC-319)(2011/Jun/27 10:24:14)

Mon, 27 Jun 2011 10:24:14 +0800

Dyeing Rubbing Tester checks color infection of textile in rubbing action.Apply to textile and leather industries.

This instrument provides a specific load to be used with white cloth for checking the color inflection of textile in rubbing action.

This Dyeing Rubbing Tester is for colored fabric or leather and similar material.

To test the dyeing-color firmness against abrasion,use standard white cotton(dry or wet) to number of times smoothly to the colored specimen, then take out white cotton cloth to compare with " standard gray scale" and evaluate the level of color firmness against abrasion of dying or printing of the material.

The instrument can meet your test requirement and supply solutions of low cost.(2011/Jun/27 10:24:14)